Bought a new split AC and wondering what installation will actually cost? You're right to investigate before the technician arrives. Split AC installation pricing in Delhi NCR varies widely — from ₹1,200 "basic labour" quotes that balloon with extras, to transparent all-inclusive packages. This guide breaks down every component so you know exactly what you're paying for.
| Component | Cost Range | Notes |
|---|---|---|
| Installation labour (indoor + outdoor unit) | ₹1,200 – ₹1,800 | Standard ground-floor or up to 3rd floor |
| Copper piping (first 3 metres included) | ₹600 – ₹800 per extra metre | Good quality copper, not aluminium |
| Outdoor unit MS bracket | ₹400 – ₹700 | Wall-mounted or window-sill type |
| Drain pipe (PVC, 3 metres) | ₹200 – ₹400 | Longer runs charged extra |
| Electrical wiring (if new point needed) | ₹500 – ₹1,200 | Only if no existing 15A socket |
| Wall drilling (brick/concrete) | Included | Extra for RCC beam drilling: ₹300–₹500 |
| Voltage stabilizer (optional) | ₹1,500 – ₹3,000 | Not required for modern inverter ACs |
| Typical total (standard install) | ₹2,500 – ₹4,000 | Most Delhi NCR installations fall here |
Installation labour is roughly the same regardless of AC tonnage. The difference comes from the size of the outdoor unit bracket and the gauge of copper piping required:
| AC Capacity | Labour | Piping + Bracket | Total Estimate |
|---|---|---|---|
| 0.75 Ton (small room) | ₹1,200 | ₹900 | ₹2,100 – ₹2,800 |
| 1.0 Ton | ₹1,400 | ₹1,000 | ₹2,400 – ₹3,200 |
| 1.5 Ton (most common) | ₹1,500 | ₹1,100 | ₹2,600 – ₹3,800 |
| 2.0 Ton | ₹1,800 | ₹1,300 | ₹3,100 – ₹4,500 |
| 2.0 Ton (cassette / ceiling type) | ₹2,500 – ₹4,000 | ₹1,500 – ₹2,000 | ₹4,000 – ₹6,500 |
Every installation comes with 3 metres of copper piping. If the indoor unit is far from the outdoor unit (common in DDA flats where the outdoor must go on the terrace), you'll need extra pipe at ₹600–₹800/metre. A 10-metre run adds ₹4,200–₹5,600 to the base cost.
Installing an outdoor unit on the 6th floor or above requires additional safety rigging and time. Expect a surcharge of ₹500–₹1,500 depending on the building type.
Standard brick walls are easy to drill through. RCC (reinforced cement concrete) walls, common in modern Gurgaon and Noida apartment buildings, require a hammer drill with masonry bits and take longer — adding ₹300–₹600 to the job.
AC units need a dedicated 15-ampere socket. If your room doesn't have one near the installation site, an electrician must run a new circuit — typically ₹800–₹2,000 depending on cable length and panel distance.
Watch out for: Installers quoting ₹800–₹999 "all-inclusive" online. When they arrive, every component — bracket, pipe, drain, wire — is charged separately, and the final bill hits ₹4,000+. Always ask for an itemised quote before confirming.
Air Control installs all major brands — Daikin, Voltas, LG, Samsung, Carrier, Blue Star, Hitachi, Panasonic, O General, Godrej, and more. We operate across Delhi, Gurgaon, Noida and Faridabad with same-day and next-day slots available.
Standard split AC installation in Delhi NCR costs ₹1,200–₹1,800 for labour. Add ₹600–₹1,200 for copper piping beyond 3m, ₹400–₹600 for outdoor bracket, and ₹300–₹500 for drain pipe. Typical total: ₹2,500–₹4,000.
Manufacturer installation typically costs ₹3,500–₹6,000. Third-party installers like Air Control charge ₹2,500–₹4,000 with warranty on installation workmanship and the same trained technicians.
Standard installation includes: indoor unit wall mounting, outdoor unit bracket mounting, 3 metres copper piping, drain pipe connection, electrical connection to existing socket, gas pressure check, and test run.
A standard installation takes 2–3 hours. Complex installations involving wall drilling through thick concrete, long pipe runs above 6 metres, or high-rise buildings can take 4–5 hours.
Modern inverter ACs (2020+) have built-in voltage protection up to 290V. In areas with frequent voltage spikes (many Delhi colonies), a stabilizer adds protection for ₹1,500–₹3,000.